01
Push Bar Repair
Repair for sticking, loose or non-latching exit devices and closers.
View service →PANIC BAR INSTALLATION · PHOENIX, AZ
Panic Bar Installation in Phoenix, AZ
Opening a new space, replacing worn hardware or adding an exit device to a back door? We install panic bars sized and styled for your door, whether rim, vertical rod or mortise, so people get out with one push and the door stays secure from outside.
Insured & Certified
Phoenix Based · 85044
Mobile Service
NEW EXIT DEVICES
The Right Panic Bar For Each Exit Door
Panic bar installation in Phoenix comes down to matching the device to the door. Single or double doors, aluminum or hollow metal, with or without a center mullion: each points to a different exit device.
Rim devices suit most single back doors, vertical rod devices fit pairs of doors without a center post, and mortise devices give heavy-traffic doors a stronger latch. We install the bar, outside trim and strike, and make sure the door opens with one push. Exit doors must allow free egress, so we keep your local fire and building requirements in view and suggest confirming details with your inspector when needed.
Rim Exit DevicesVertical Rod Exit DevicesMortise Exit DevicesExit Alarm BarsOutside Lever & Pull Trim
EXIT DEVICESBar, trim and strike installed and tested.
01
Single & Double Doors
Rim, vertical rod and mortise devices.
02
Outside Trim Options
Lever, pull or key cylinder trim.
03
Upfront Pricing
You get the price before we start working.
COMMERCIAL SERVICES
Exit Devices & Related Commercial Services
New exit hardware often ties into locks and entry systems. Tap any service for the full details.
02
Mortise Lock Replacement
New mortise lock bodies and cylinders for storefront doors.
View service →03
Access Control Installation
Electrified exit devices tied into a card or keypad system.
View service →04
High Security Locks
Restricted cylinders for exit device outside trim.
View service →05
Commercial Lock Change
Rekey or replace the cylinders on new exit hardware.
View service →06
Commercial Locksmith
The full list of locksmith services for Phoenix businesses.
View service →
Exit Device Installation
Fitting A New Panic Bar Is Precise Work
Panic bar installation depends on careful measuring, because the device, trim and strike all have to line up on your specific door.
1
Measure The Opening
We record door width, material, stile size and whether a pair has a mullion, which tells us if a rim, vertical rod or mortise device fits.
2
Prep The Door
Old hardware comes off, filler plates cover unused holes, and new mounting holes and trim cutouts are drilled to the exit device template.
3
Mount Bar & Trim
The device body, outside lever or pull trim and strike are installed and aligned so the latch drops cleanly into the strike every time the door closes.
4
Push-Test For Egress
We push the bar from inside repeatedly, check that the outside trim locks as intended and confirm the door swings free with one motion for safe exiting.
WHAT AFFECTS THE COST
Panic Bar Pricing Depends On The Door
Exit devices vary a lot by door and use. These are the main factors behind the cost of a panic bar installation.
01
Device Type
Rim, vertical rod and mortise exit devices differ in parts and labor.
02
Single Or Double Door
Pairs of doors may need vertical rods or a removable mullion.
03
Door Material
Aluminum, hollow metal and wood doors are prepped differently.
04
Outside Trim
Dummy pull, lever or key cylinder trim on the outside.
05
Finish & Grade
Finish and duty rating for light or heavy traffic.
06
Existing Door Prep
Reusing existing holes is simpler than new cutouts.
NEED A QUOTE?Tell us the door type and whether it is single or double.
Call (602) 806-7771We quote the price before any work starts.
Why Phoenix Chooses Us
Why Businesses Choose Us For Exit Device Installs
Insured & Certified Locksmiths
Certified, background-checked technicians, fully insured for your protection. Garage door work is Licensed, Bonded & Insured.
Upfront, Honest Pricing
No hidden fees, no surprise charges. We quote before we work — and we stand behind every price.
Mobile — We Come to You
Fully equipped service vehicles with parts onboard. Most locksmith and garage door jobs completed on site in one visit.
7 Days a Week — 7 AM to 9:30 PM
Weekdays and weekends, one call and we’re on the road from our Ahwatukee office in Phoenix.
Where We Service
Panic Bar Installation For Phoenix Restaurants, Shops & Warehouses
New exit hardware goes onto kitchen back doors in Tempe, warehouse exits in South Phoenix and Laveen, retail suites in Chandler and Gilbert, and clinics in Mesa and Scottsdale. Each installer leaves from our Ahwatukee-area office at 9830 S 51st St, Phoenix, AZ 85044, with common rim and vertical rod devices on board, so many installs need only one trip.
Service Area
9830 S 51st St B-122
Phoenix, AZ 85044 · mobile service
Phoenix, AZ 85044 · mobile service
Phone
Hours
Mon–Sun · 7:00 AM – 9:30 PM
Mobile
Fully equipped vans · locksmith & garage door
Cities We Serve
Tap a city to see our local locksmith & garage door service
Phoenix
Home base
Locksmith and garage door service across Phoenix — home, car and business lockouts, rekeys, car keys and spring repair.
Ahwatukee
85044 · 85045 · 85048
Our neighborhood. Fastest response for lockouts, smart locks and garage door springs in the Foothills.
South Phoenix
85040 · 85041 · 85042
South Mountain and Baseline corridor — rekeys, lock changes and car key replacement.
Laveen
85339
Newer homes west of South Mountain — rekey after move-in, smart locks and garage door openers.
Tempe
85281 · 85282 · 85283 · 85284
ASU, Kyrene and South Tempe — car lockouts, key fobs, apartment and home lock service.
Chandler
85224 · 85225 · 85226 · 85286
West Chandler to the Price corridor — business locks, access control and garage door repair.
Mesa
85202 · 85210
West Mesa and Dobson Ranch — home lockouts, rekeys and car key programming.
Gilbert
85233 · 85234
Family homes and new builds — smart locks, deadbolts, springs and openers.
Guadalupe
85283
Right next to Ahwatukee and Tempe — quick lockout and rekey response.
Scottsdale
85251
Old Town and south Scottsdale — high-security locks and commercial lock service.
Testimonials
5.0 ★★★★★47 Google reviews
See Why Phoenix Trusts Us
Contact Us
Get in Touch with Your Locksmith & Garage Door Pros in Phoenix
Lockout, new car key, rekey or a broken garage door spring? Our mobile team is ready 7 days a week for professional on-site service across Phoenix and the East Valley.
Phone
Reviews
Hours
Mon–Sun · 7:00 AM – 9:30 PM
PANIC BAR INSTALLATION FAQ
Got a Question? Or Just Call (602) 806-7771
Quick answers below — but the fastest way to a real quote and a tech at your door is to pick up the phone. We answer 7 days a week, 7 AM – 9:30 PM.
What does panic bar installation in Phoenix include?+
We fit the exit device, outside trim and strike to your door, adjust the latch and test that the door opens with one push and locks behind you.
Which panic bar is right for a double door?+
It depends on whether the pair has a center mullion. Without one, vertical rod devices are common; with one, rim devices on each leaf are an option. We recommend after seeing the door.
Do panic bars meet fire code?+
Exit devices are designed to allow free egress, and we install them with that in mind. Requirements vary by building and occupancy, so confirm details with your local fire or building inspector.
Can a panic bar door be locked from outside?+
Yes. Outside trim with a key cylinder or lever lets staff enter, while the inside bar always lets people out.
Can a panic bar work with my access control?+
Yes. Electrified exit devices or electric strikes can tie into a card or keypad system. Call (602) 806-7771 to plan it.